Almost every activity that we take up demands precision and skill. Even the sport of bow hunting, isn’t it? Hunting is a fun experience indeed. But it’s hard work wanting to target for your kill to get venison. However, what makes it less challenging is getting the proper equipment. By equipment, I mean broadhead.
Broadheads require a certain kind of a set up prior to application. To be more specific, it calls upon quick screwing. But what should be used to screw on broadheads? That’s the most important question here.
So if you wish to know the correct answer, I’d suggest you keep on reading.
What Should Be Used To Screw On Broadheads – Different Methods
Let me get straight to the point without wasting time. There are as many as three techniques to screw that broadhead to your bow. And they are as follows:
The gluing method ranks as incredibly effective at the time of screwing in the broadhead. For the task, you employ either hot glue or cold glue. And each type of glue offers distinct advantages and disadvantages. These I’ll be discussing at length below, right after this section.
Then there’s tying, which was primarily adopted back in the days. A rope was more than enough to tie the broadhead around your bow. However, the tying technique is not such an efficient option anymore. Especially when it comes to keeping your precious broadhead in that bow!
The broadhead comes with a wrench and specialized screw, right? So you can easily attach it to the bow. In that case, the screw-in method is very effective. All you have to do is follow the broadhead manufacturer’s instructions.
So these are the three different ways you can screw on broadheads. As for what should be used to screw on broadheads, the exact answer lies below.
How to Use Hot Glue/Cold Glue to Screw on Broadheads?
How to screw on broadheads properly using hot and cold glue? It’s time to get to know all the steps involved. Along with the upside and downside of using both hot and cold glue!
How to Screw On Broadheads with Hot Glue
Here’s the thing about hot glue. It makes the process easier and quicker. Cause you’re able to align or remove your broadheads quite effortlessly. However, the method does involve a risk of steel damage. So you’ve got to be a little careful about that.
Use a glue gun or heat source to make the glue warm enough. So it can melt that liquid.
Simply place 2-3 drops on your broadhead.
The next step involves inserting the arrow into the broadhead. Warm it up till the glue starts to run uniformly between the broadhead and arrow.
Just make sure that you don’t overheat your broadhead. Otherwise, the steel’s hardness gets compromised.
Advantages of Using Hot Glue:
Drawbacks of Using Hot Glue:
How to Screw On Broadheads with Cold Glue
Photo credit: soleadventure.com
Are you planning on using superglue? If yes, then it’s important to align your broadhead quickly. That’s because superglue is very prone to setting really fast. As for regular glue, it takes a longer time to set. So you can allow that to happen before you use it.
Using cold glue is more common. It’s because cold glue is a safer option, for the broadhead too. However, aligning your broadhead with superglue is not easy. And the worst part; you cannot remove the thing once it’s fixed.
So it all depends on your preferences. Whether you wish to use cold glue or hot glue! You might want to use hot glue due to its ease of removal and alignment. Or cold glue because of the safety factor!
Advantages of Using Cold Glue:
Drawbacks of Using Cold Glue:
Important Safety Tips on Bow Hunting
Photo credit: archerybusiness.com
What should be used to screw on broadheads? You now know the correct answer to this question, don’t you? With that in place, why not get to know a little more?
Safety is crucial at every step of the way. So when you’re using your broadhead for bow hunting, you’ve got to keep some important tips in mind.
- 1Use a quiver to cover the broadheads when at home or the field. You can’t even imagine the number of accidents that take place in hunting areas. As a result of holding the sharp and bare broadhead at the time of setting up. Or when unloading equipment.
- 2When dressing your game, please keep in mind to check the creature for broadhead signs. It’s more likely that a few parts are around the body.
- 3Dressing the game with utmost caution is necessary. Be very careful at the time of handling the animal up until all broadhead parts are found. Such a habit goes a long way in avoiding injuries when carrying the game.
- 4No matter what, always buy durable, robust broadheads. That don’t break too easily! Great broadheads are available both online and offline.
Fixed or Mechanical broadheads
Just make sure that you screw on the broadhead tightly. If you wish to prevent failure! Irrespective of whether you’re working with cold glue or hot glue.
There’s no denying that bow hunting calls for proper knowledge and adequate equipment. The former is important if you wish to use the latter correctly. Particularly when deadly and sharp tools like broadheads are involved!
So you should know the answer to the question. What should be used to screw on broadheads? And how to screw on broadheads properly? Both of which I’ve discussed at length in my post.
So do you have anything else you fancy to share about broadheads or bow hunting? If yes, then feel free to go bonkers in the comments section. Let’s make the activity even more adventurous. And safer, more importantly!
Related Tips and Tricks from BestMenTools Lists: